Automatic standby generator

System notices about outages and upgrades can be found here.

Moderator: forhire

Automatic standby generator

Postby forhire » Wed Jul 14, 2004 3:15 am

A couple of weeks ago our new standby generator arrived. We just completed the concrete pad that the generator will sit on. Once the pad cures we'll place the generator and have the electrician hook it up. It will be very nice to have reliable backup power.
forhire
Site Admin
 
Posts: 376
Joined: Thu Jun 24, 2004 7:56 pm
Location: Morton, Washington

Postby forhire » Wed Jul 21, 2004 12:01 am

We installed the rubber shock mounts for the generator this morning. We are waiting for the fork lift to install the genset on the slab tomorrow. I can's wait to see it installed.
forhire
Site Admin
 
Posts: 376
Joined: Thu Jun 24, 2004 7:56 pm
Location: Morton, Washington

Postby forhire » Wed Jul 21, 2004 7:13 pm

After a long hot afternoon we finally have the generator set on the slab and fully bolted down. We are now awaiting the electrician.
forhire
Site Admin
 
Posts: 376
Joined: Thu Jun 24, 2004 7:56 pm
Location: Morton, Washington

Postby forhire » Tue Aug 17, 2004 9:34 am

Electrician is here today. Yeah!
forhire
Site Admin
 
Posts: 376
Joined: Thu Jun 24, 2004 7:56 pm
Location: Morton, Washington

Postby forhire » Sat Aug 28, 2004 12:59 am

We passed our electrical inspection and have scheduled with the PUD to energize the new service on Wednesday September 1st at 8:00 AM. The electrician will require about 10 or 15 minutes to cut over our panels once the main service is switched. No outages are expected as our battery backups should last. We expect to load test the generator within two weeks. Hopefully we can complete this upgrade before more bad weather hits.
forhire
Site Admin
 
Posts: 376
Joined: Thu Jun 24, 2004 7:56 pm
Location: Morton, Washington

Postby forhire » Wed Sep 01, 2004 5:50 pm

The PUD and the electrician completed the transfer of service to our new panel. We have scheduled to load test the generator on Wednesday, September 8th, 2004 in the morning. Barring no issues we will be ready to put the unit in service mid next week. Soon we can all sleep better at night.
forhire
Site Admin
 
Posts: 376
Joined: Thu Jun 24, 2004 7:56 pm
Location: Morton, Washington

Postby forhire » Wed Sep 08, 2004 6:10 pm

The generator passed it's load testing this morning and we have sucessfully transfered power automatically. We now have backup power withing 7 seconds of a power outage. Sure beats getting out of bed in the middle of the night. I guess now "we'll leave the lights on for you" :)

This thread is finally closed.
forhire
Site Admin
 
Posts: 376
Joined: Thu Jun 24, 2004 7:56 pm
Location: Morton, Washington


Return to Service Notices

Who is online

Users browsing this forum: No registered users and 11 guests

cron